Clocks, Commissions, Fill Your House for Free, kitchen, lounge, restaurant or bar, Salvage, Up-Cycle, woodwork
It’s as simple as finding an unwanted, and hopefully damaged or unplayable piano (I’d hate you to smash up one that can be played!) and removing the keys.
You need to decide how large you want your wall clock to be as this will govern how much you chop off the keys. You might want yours longer or shorter than mine – it all depends on the wall space you have, clock inner you are using and the size of the room. So once you know what length you want – chop ’em down!
I used my table mounted circular saw – or chop saw to cut them to the required length, you could use a handsaw if you don’t have one.
I then took my level, a length of string, a piece of chalk and a drawing pin. With my level and the chalk I drew a horizontal line where the middle of the clock would sit, and did the same with a verticle line – where the two lines cross is the centre of my clock. I used the string, chalk and pin to create a large makeshift compass.
Drawing these lines inks in chalk means they wipe off easily afterwards, yet they make it so much easier to get the keys in the correct position. I used instant grab adhesive to attach the keys to the wall – which means they won’t come off easily, so you really don’t want to bodge this up!!
The clock inner I have used here is actually my old kitchen wall clock, I have one I’ve made out of an old 1950’s hubcap now so it was demoted to the junk pile – I knew it wouldn’t be sitting there […]